文献类型：期刊文献

中文题名：反复焊接对超低碳奥氏体不锈钢耐腐蚀性能的影响

英文题名：INVESTIGATION OF THE EFFECT OF REWELDING ON ANTI-CORROSION PROPERTIES OF ULTRA-LOW CARBON AUSTENITIC STAINLESS STEEL

作者：项阳[1];陈进[2];王印培[2];孙晓民[2]

机构：[1]上海氯碱股份有限公司,上海200241;[2]华东理工大学化机研究所,上海200237

年份：2005

卷号：41

期号：3

起止页码：113

中文期刊名：理化检验（物理分册）

外文期刊名：Physical Testing and Chemical Analysis(Part A:Physical Testing)

语种：中文

中文关键词：超低碳奥氏体不锈钢;反复焊接;耐腐蚀性能

外文关键词：Ultra-low carbon austenitic stainless steel; Rewelding; Anti-corrosion properties

摘要：通过对反复焊接1～5次的超低碳奥氏体不锈钢的晶间腐蚀试验及应力腐蚀试验,研究了反复焊接对超低碳奥氏体不锈钢的耐腐蚀性能的影响.试验结果显示,在同一部位反复焊接5次后,超低碳奥氏体不锈钢的晶间腐蚀倾向和应力腐蚀敏感性没有发生明显变化,表明超低碳奥氏体不锈钢在选择合适的焊接材料、焊接工艺和焊接方法的前提下,同一部位可反复焊接5次,而其耐腐蚀性能不会受到影响.
An investigation was made on the effect of rewelding on anti-corrosion properties of ultra-low carbon austenitic stainless steel based on intergranular corrosion test and stress corrosion test. Study shows that 5 times of rewelding at the same position will not have evident influence on the trend of intergranular corrosion and the sensitive to stress corrosion of ultra-low carbon austenitic stainless steel, if the proper weld procedure, proper welding material and proper weld technique were adopted.