文献类型：期刊文献

中文题名：Y型气流式喷嘴的雾化滴径和滴径分布

英文题名：Droplet Size and Droplet Size Distribution of Y-Type Air-Blast Nozzle

作者：纪利俊[1];陈葵[1];武斌[1];朱家文[1];刘海峰[2]

机构：[1]华东理工大学化工学院;[2]华东理工大学资源与环境学院,上海200237

年份：2009

卷号：23

期号：4

起止页码：577

中文期刊名：高校化学工程学报

外文期刊名：Journal of Chemical Engineering of Chinese Universities

收录：CSTPCD;;EI(收录号：20093812326548);Scopus;北大核心:【北大核心2008】；CSCD:【CSCD2011_2012】；

基金：上海氯碱化工股份有限公司电化厂提供资助

语种：中文

中文关键词：喷嘴;气流式;雾化;滴径;随机分裂

外文关键词：nozzle; air-blast; atomization; droplet size; stochastic breakup

摘要：索特平均滴径(SMD)和滴径分布是描述喷嘴雾化性能的主要指标。根据Y型喷嘴雾化过程的特征,提出了Y型喷嘴的液滴随机分裂模型,得到了SMD的表达式。考察了Y型喷嘴对氯化聚氯乙烯(CPVC)氯化液的雾化过程,利用Mastersizer2000型测粒仪测定了雾化滴径分布。关联了SMD的经验方程,得到了初次雾化平均滴径。采用液滴随机分裂模型模拟计算了雾化滴径分布,计算结果与实验结果吻合,说明模型和平均滴径方程可以用来预测Y型喷嘴的雾化性能。
Sauter mean diameter （SMD） and droplet size distribution are important parameters for description of atomization property of a nozzle. In this paper, a stochastic breakup model was presented according to the atomization characteristics of the Y-type air-blast nozzle, and the equation for SMD calculation was obtained based on the model. Atomization process of chlorinated polyvinyl chloride （CPVC） solution was investigated with Y-type air-blast nozzle. The droplet size distribution was measured by using Malvern Mastersizer of type 2000. Based on the experimental data, the SMD equation was fitted and the mean droplet diameter of initial breakup was obtained. According to the stochastic breakup model, the droplet breakup process was simulated with Matlab 6.5. The simulation results of the droplet size distribution agreed well with the experimental data. With the equation of SMD and the model, the SMD and the droplet size distribution of Y-type air-blast nozzle can be predicted satisfactorily.