文献类型：期刊文献

中文题名：豌豆蛋白双螺杆挤压参数对其停留时间分布的影响

英文题名：Effect of Extrusion Parameters on the Residence Time Distribution of Pea Protein during Twin-Screw Extrusion Process

作者：金鑫[1];刘少伟[1];高遹宸[1];林绍梁[2];郑国生[1];周英[1]

机构：[1]华东理工大学生物工程学院,上海200237;[2]华东理工大学材料科学与工程学院,上海200237

年份：2021

卷号：46

期号：7

起止页码：74

中文期刊名：食品科技

外文期刊名：Food Science and Technology

收录：北大核心:【北大核心2020】；

基金：上海市科委基础重点项目(18JC1410802)。

语种：中文

中文关键词：豌豆蛋白;植物蛋白肉;组织蛋白;停留时间分布

外文关键词：pea protein;plant-based meat;textured protein;residence time distribution

摘要：豌豆蛋白是制备植物蛋白肉的一种新兴的植物蛋白。以豌豆蛋白作为原料,采用双螺杆高水分挤压技术,利用停留时间分布的原理分析螺杆转速、喂料速度和挤压温度3种挤压参数对物料的影响。随着螺杆转速和喂料速度的增加,物料平均停留时间缩短,轴向混合程度减弱,组织化效果变差。豌豆蛋白的组织化需要较高的温度,达到一定温度后,随着挤压温度的增加,物料平均停留时间延长,混合程度增加,组织化效果变好。正交试验结果显示,3种挤压参数对混合程度的影响为喂料速度>挤压温度>螺杆转速,最佳试验条件为螺杆转速300 r/min、喂料速度10 g/min、挤压温度150 ℃。最佳试验条件下的豌豆组织化蛋白的质构与熟牛肉接近,组织化程度也有了明显的提升。
Pea protein is a kind of promising plant protein for making plant-based meat.In this paper,pea protein was used as raw material,using high-moisture extrusion to texture it.The effects of screw speed,feeding speed and extrusion temperature on plant-based meat were respectively analyzed by calculating residence time distribution.The results showed that with the increase of screw speed and feeding speed,the mean residence time was shortened,and the mixing extent and the textured degree were weakened.A high temperature was needed to texture pea protein.After reaching a certain temperature,with the increase of extrusion temperature,the mean residence time became longer,the mixing extent and the textured degree were enhanced.The results of orthogonal experiment showed that feeding speed had the greatest effect on the mixing extent,followed by extrusion temperature,while screw speed had the least effect.When screw speed was 300 r/min,feeding speed was 10 g/min,and extrusion temperature was 150 ℃,the texture of textured pea protein was best,which was close to the cooked beef.