文献类型：期刊文献

中文题名：等径角挤压Cu-10%Cr合金过程塑性

英文题名：Finite Element Analysis of Plastic Deformation Behavior During Equal Channel Angular Pressing of Cu-10%Cr alloy

作者：邓鉴棋[1];张修庆[1];刘富[1];赵祖欣[1];叶以富[1];

机构：[1]华东理工大学,机械与动力工程学院,上海,200237;

年份：2008

期号：z1

中文期刊名：材料工程

外文期刊名：JOURNAL OF MATERIALS ENGINEERING

语种：中文

中文关键词：Eshelby等效夹杂方法;瞬时应变变化;硬度分布

外文关键词：Eshelby's equivalent inclusion method;transient variation of strain;hardness distribution

摘要：等径角挤压(EACP)能够制备具有超细晶粒的致密材料,而且其材料具有优良的机械性能.所以,等径角挤压是目前材料研究的热点之一.在本文中,建立了Eshelby等效夹杂方法的模型,并采用有限元方法对Cu-10%Cr合金的等径角挤压过程进行了模拟.研究了等径角为90°和120°时的两种模型,并对两种模型中材料的等效应变分布,瞬时应变和变形形状变化,以及截面硬度分布进行了分析.研究结果表明,等径角为120°的模型中材料的应变分布比等径角为90°的模型更加均匀;此外,两种模型中材料的硬度分布与应变分布具有较强的联系,等径角为90°的模型中,材料具有较高的硬度值和更加剧烈的硬度变化.两模型硬度最大值差别达到了8.5%.
Equal channel angular pressing (ECAP) has been the subject of intensive study in recent years due to its capability of producing fully dense samples having a ultrafine grain size and having lots of excellent mechanical properties.In this study,the results of the finite element analysis of Cu-10% Cr material during the ECAP process using Eshelby's equivalent inclusion method were presented.And the two cases,die with ψ= 90°and ψ= 120°,were investigated,including the equivalent strain distribution,the transient variation of strain and deformed shapes and the hardness distribution of section in sample after one pass.The distribution of strain is more homogeneous in the die with ψ=120°than in the die with ψ=90°.And the shear strain in ECAP using the high channel angle die is lower than that using the low channel angle.Additionally,the hardness distribution of ECAP with ψ=90°and ψ=120° has strong relationship with the distribution of the strain in two cases.The die with ψ=90° result shows the higher hardness values and more severe variation range of the hardness distribution.The difference between the two maximum hardness values is about 8.5%.