文献类型：期刊文献

英文题名：Modeling of multiphase reaction and slag flow in single-burner coal water slurry gasifier

作者：Xu, Jianliang[1,2];Dai, Zhenghua[1,2];Liu, Haifeng[1,2];Guo, Liangyu[3];Sun, Feng[4]

机构：[1]East China Univ Sci & Technol, Key Lab Coal Gasificat & Energy Chem, Minist Educ, POB 272, Shanghai 200237, Peoples R China;[2]East China Univ Sci & Technol, Shanghai Engn Res Ctr Coal Gasificat, POB 272, Shanghai 200237, Peoples R China;[3]ENN Grp, Ordos City 014300, Inner Monglia, Peoples R China;[4]State Key Lab Safety & Control Chem, Qingdao 266071, Shangdong, Peoples R China

年份：2017

卷号：162

起止页码：41

外文期刊名：CHEMICAL ENGINEERING SCIENCE

收录：;EI(收录号：20170103217060);WOS:【SCI-EXPANDED(收录号:WOS:000397832600005)】；

基金：This work was supported by the National Natural Science Foundation of China (21376082, U1402272) and the Shanghai Natural Science Foundation (15ZR1409500).

语种：英文

外文关键词：Single-burner; Coal water slurry; Gasification; Numerical simulation; Slag model

摘要：The slag flow properties and temperature distribution have a critical influence on the lifetime of refractory bricks. A comprehensive model has been developed to simulate a multiphase flow and reaction process within the spatial region and refractory wall, and is applied to a study on the multiphase flow characteristics of a single-burner entrained-flow gasifier. The gasifier performance, gas temperature distribution, and outer surface temperature distribution of the wall are compared with industry measurement data. The simulation results are in good agreement with the industrial data. The capture efficiency of the refractory wall is approximately 91%, and 82% of the particles are trapped by the wall. The distribution of the gas temperature near the refractory wall, the slag surface temperature, and the refractory wall surface temperature aresimilar. The slag surface temperature first decreases from top to bottom, and then increases to the highest temperature at 2.2D. The slag attack rate coincides with the refractory brick corrosion rate. The refractory surface temperature, molten slag fluidity, and molten slag flow rate have a significant impact on the refractory brick corrosion rate. No solid slag layer is present on the refractory bricks, and the molten slag layer thickness increases from 0 to 5 mm along the flow direction. In the molten slag layer, the non-dimensional slag velocity profile shows a self-similarity and follows a parabolic equation. (C) 2016 Elsevier Ltd. All rights reserved.