文献类型：期刊文献

中文题名：硬质合金可转位刀片槽型曲面的非接触式三维扫描与建模研究

英文题名：Research on Non-contacted Three-dimensional Scanning and Modeling of Carbide Indexable Insert Groove Surface

作者：孙路[1];李英[1];何云[1]

机构：[1]华东理工大学机械与动力工程学院,上海200237

年份：2011

卷号：28

期号：6

起止页码：368

中文期刊名：硬质合金

外文期刊名：Cemented Carbides

收录：CSTPCD;;北大核心:【北大核心2008】；

语种：中文

中文关键词：硬质合金可转位刀片;复杂曲面;三维扫描;点云处理;建模

外文关键词：carbide indexable insert; complex surface; 3-D scanning; point cloud processing; modeling

摘要：在采用非接触式三维扫描技术对硬质合金可转位刀片槽型复杂曲面扫描的过程中,通过修正相机镜头畸变提高扫描精度,运用Geomagic Studio软件对点云数据进行噪声去除、点云拼接和特征提取等系列处理保证重构模型的准确性。重构刀片的三维模型经过与原始点云数据的误差比较,大部分的偏差值在(-0.011,0.011)区间内,满足精度要求。在扫描过程中,应选择刀片主要特征表面进行扫描,以减少扫描角度及扫描次数。同时,根据重建模型的曲面特征对数据块进行曲面修改,可以更有效、快捷的优化该刀片槽型的设计。
In the course of scanning carbide indexable insert chip-breaker by non-contacted 3-D scanning technique,the camera lens distortion is amended to improve the scanning accuracy,and a series of disposals of point cloud data such as de-noising,matching and feature extraction are adopted by Geomagic Studio to ensure the accuracy of reconstructed model.Comparing the reconstructed model with the original point cloud data,most of deviations are in an open interval between-0.011 and 0.011,that meets the accuracy requires.During the scanning procedure,only main characteristic surfaces are scanned in order to reduce scanning angles and times of scanning.Meanwhile,the insert chip-breaker can be optimized efficiently and rapidly by amending data block in terms of surface characteristics in reconstructed model.