详细信息
水合作用对阳极氧化多孔Al2O3/Al载体晶态的影响 ( EI收录)
Effect of Crystalline State of Anodized Porous Al_2O_3/Al as Supports by Hydration
文献类型:期刊文献
中文题名:水合作用对阳极氧化多孔Al2O3/Al载体晶态的影响
英文题名:Effect of Crystalline State of Anodized Porous Al_2O_3/Al as Supports by Hydration
作者:张琪[1];蒋中锐[1];孙冬梅[1];韩达英[1];朱子彬[1]
机构:[1]华东理工大学化工学院,大型工业反应器工程教育部工程研究中心,上海200237
年份:2012
卷号:27
期号:7
起止页码:693
中文期刊名:无机材料学报
外文期刊名:Journal of Inorganic Materials
收录:CSTPCD;;EI(收录号:20123615395940);Scopus;北大核心:【北大核心2011】;CSCD:【CSCD2011_2012】;
基金:国家自然科学基金(20906023);教育部留学回国人员科研启动基金;中央高校基本科研业务费专项基金~~
语种:中文
中文关键词:阳极氧化;氧化铝;水合作用;板状载体
外文关键词:anodic oxidation; alumina; hydration; plate support
摘要:通过阳极氧化法制备出多孔氧化铝板状催化剂载体,考察了不同水合条件对多孔氧化铝膜性能的影响,并通过TG、XRD、SEM和BET等分析手段研究了Al2O3/Al的晶态形成规律.实验结果表明,最佳水合温度为80℃,非晶态氧化铝发生反应生成AlOOH,经过500℃焙烧可以完全转化为γ-Al2O3.经过水合后制备的γ-Al2O3/Al板状催化剂载体在高温水蒸气氛围下晶型结构稳定性能好.
The porous alumina as a plate catalytic support was prepared by anodization.Effects of hydration condition on the property of alumina supports were studied.The samples were characterized by XRD,SEM,BET and etc.to illustrate the Al2O3/Al forming mechanism.The results show that the best hydration temperature is 80℃,at which the amorphous alumina can be transformed into AlOOH,and become γ-Al2O3 after 500℃ calcination.Meanwhile,the monoliths catalytic carriers have a superior stability for crystalline structures in the steam atmosphere at high temperature.
参考文献:
正在载入数据...
