详细信息
文献类型:期刊文献
中文题名:基于改进残差的显著误差检测方法
英文题名:Gross Error Detection Based on Modified Error
作者:沈凯[1];吴胜昔[1];彭竹[1];顾幸生[1]
机构:[1]华东理工大学化工过程先进控制和优化技术教育部重点实验室,上海200237
年份:2014
卷号:40
期号:6
起止页码:730
中文期刊名:华东理工大学学报(自然科学版)
外文期刊名:Journal of East China University of Science and Technology
收录:CSTPCD;;Scopus;北大核心:【北大核心2011】;CSCD:【CSCD2013_2014】;
基金:国家自然科学基金(61174040);上海市科委基础研究项目(12JC1403400);上海市重点学科建设项目(B504)
语种:中文
中文关键词:投影矩阵;误差系数;显著误差;电力系统
外文关键词:projection matrix; error coefficient; gross error; power system
摘要:运用投影矩阵法提出了一种表征测量误差程度的不可检测误差系数(UI)。UI值越高,说明测量误差与实际误差之间的差值越大,具有较高UI值的测量值容易出现显著误差漏报的现象。本文采用UI值对所有测量值误差进行修正,并将改进后的误差应用到显著误差检测中,以提高显著误差检测的准确度。仿真结果表明,基于改进残差的显著误差的检测方法能够提高显著误差的检测精度。
In this paper, an undetectability index (UI) for measurement error was proposed by using the projection matrix. If the UI value of the measurement error is higher, there may be larger difference between the measurement error and actual error, which means the omission of gross error may easily happen for the measurement with higher UI value. Hence, this paper utilized the UI value to modify all the measurements errors,which would further be adopted in the detection of gross error so as to improve the accuracy of the gross error gross error detection can attain detection. The simulation results on power system show that the modified higher accuracy of the gross error detection
参考文献:
正在载入数据...
