文献类型：期刊文献

中文题名：碳纤维/环氧树脂界面的强韧化设计方法研究

英文题名：Strengthening-toughening design method of carbon fiber/epoxy resin interface

作者：王沁宇[1];卓家桂[2];李新顶[2];杜鹏程[1];王文[1];朱大雷[3];谈建平[4]

机构：[1]福建福清核电有限公司,福建350318;[2]上海一核阀门股份有限公司,上海201823;[3]北京卫星制造厂有限公司,北京100094;[4]华东理工大学机械与动力工程学院,上海200237

年份：2023

期号：8

起止页码：14

中文期刊名：复合材料科学与工程

外文期刊名：Composites Science and Engineering

收录：北大核心:【北大核心2020】；

基金：国家自然科学基金(52075174)。

语种：中文

中文关键词：复合材料;强韧化设计;界面剪切强度;界面韧性

外文关键词：composites;strengthening-toughening design;interfacial shear strength;interfacial toughness

摘要：为了同时提升碳纤维/环氧树脂复合后的界面强度和韧性,设计了新型“刚-柔”界面层。该方法采用超声分散将刚性的多壁碳纳米管(MWCNT)与柔性的热塑性聚氨酯(TPU)在N,N-二甲基甲酰胺溶液中均匀分散,随后采用浸涂法将MWCNT与TPU同时沉积在碳纤维表面对其进行改性。采用扫描电子显微镜、原子力显微镜、红外光谱和拉曼光谱对改性后碳纤维表面进行表征,并采用纤维束拔出实验测试了碳纤维/环氧树脂的界面剪切强度和拔出位移。结果表明:利用上述碳纤维/环氧树脂界面的强韧化设计方法可将MWCNT和TPU均匀沉积在碳纤维表面;与对照组相比,由于该方法实现了化学的氢键作用和物理的机械连锁作用的协同,改性后的碳纤维/环氧树脂界面剪切强度提升了163.3%,拔出位移提升了52.8%,表明本文所设计的“刚-柔”界面层对提升碳纤维/环氧树脂界面的强度和韧性有积极作用。
To improve the interfacial strength and toughness of carbon fiber/epoxy resin composites simultane?ously,a novel“rigid-soft”interface layer was constructed via dispersing rigid multi-walled carbon nanotubes(MWCNT)and soft thermoplastic polyurethane(TPU)in N,N-Dimethylformamide solution by ultrasonic and de?positing them on carbon fiber surface by dip-coating technique.Scanning electron microscopy,atomic force micro?scopic,fourier transform infrared spectroscopy and Raman spectroscopy were used to characterize the surface of CF.The interfacial shear strength(IFSS)and pull-out displacement of CF/epoxy resin composites were tested by fiber pull-out testing.The results show that:MWCNT and TPU can uniformly distributed on the surface of CF by above method.Compared with pristine CF,the IFSS and pull-out displacement of modified CF were respectively improved by 163.3%and 52.8%due to the hydrogen bonding and mechanical interlocking between MWCNT and TPU,which indicates the“rigid-soft”interface layer have a positive effect on the enhancement for the interfacial strength and toughness of carbon fiber/epoxy resin composites.