详细信息

不同添加剂对聚偏氟乙烯膜结构和性能的影响  ( EI收录)  

Effect of Different Additives on Morphology and Properties of Poly(Vinylidene Fluoride) Membrane

文献类型:期刊文献

中文题名:不同添加剂对聚偏氟乙烯膜结构和性能的影响

英文题名:Effect of Different Additives on Morphology and Properties of Poly(Vinylidene Fluoride) Membrane

作者:李倩[1,2];许振良[1,2];俞丽芸[2];袁国林[2]

机构:[1]华东理工大学化学工程联合国家重点实验室;[2]华东理工大学化学工程研究所膜科学与工程研发中心,上海200237

年份:2010

卷号:26

期号:2

起止页码:80

中文期刊名:高分子材料科学与工程

外文期刊名:Polymer Materials Science & Engineering

收录:CSTPCD;;EI(收录号:20101612858414);Scopus;北大核心:【北大核心2008】;CSCD:【CSCD2011_2012】;

基金:国家"973"重点基础研究发展计划(2003CB615705)

语种:中文

中文关键词:聚偏氟乙烯;混合添加剂;分相延迟时间;分相速率

外文关键词:PVDF; mixed additives; demixing delay-time; demixing rate

摘要:利用非溶剂相转化法(NIPS),以N,N-二甲基乙酰胺(DMAc)为溶剂,聚乙烯吡咯烷酮(PVPK30)和一水合氯化锂(LiCl·H2O)为混合添加剂,改变PVPK30-LiCl·H2O配比得到不同性能和结构的聚偏氟乙烯(PVDF)膜。考察了不同种类添加剂(PVP、LiCl·H2O、H2O和PEG200)及不同配比的PVPK30-LiCl·H2O添加剂对PVDF成膜分相延时时间、分相速率的影响。实验结果表明,采用PVPK30为添加剂,铸膜液呈瞬时分相行为,膜通量很大;增大混合添加剂中PVPK30/LiCl·H2O的比例,会增加液液分相速率,使膜结构中的大孔贯通整个膜结构。
Porous poly (vinylidene fluoride) (PVDF) membranes were prepared via non-solvent induced phase separation methods (NIPS). Using N, N-dimethylacetamide (DMAc) as. a solvent, the effects of polyvinylpyrrolidone (PVPK30)-lithium chloride (LiCl·H2O) mixed additives on PVDF membrane morphology and properties were investigated. The effect of different additives (PVP, LiCl·H2O, H2O, PEG200 and PVPK30-LiCl· H2O) on the demixing delay-time and demixing rate of PVDF membranes were studied. The experimental results illustrate that using PVPK30 an instantaneous demixing and high flux membrane is obtained. More PVPK30 in PVPK30-LiCl·H2O mixed additives can accelerate the rate of liquid-liquid demixing. Therefore, the macroporous structure is developed completely.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心