文献类型：期刊文献

中文题名：阴离子本体开环聚合反应挤出合成聚三氟丙基甲基硅氧烷

英文题名：Preparation of Poly[Methyl(3,3,3-Trifluoropropyl)] Siloxane by Reactive Extrusion on the Anionic Bulk Ring-Opening Polymerization Mechanism

作者：高亚娟[1];杨鹏[1];管涌[1];危大福[1];郑安呐[1]

机构：[1]华东理工大学材料科学与工程学院,上海市先进聚合物材料重点实验室,超细材料制备与应用教育部重点实验室,上海200237

年份：2011

卷号：27

期号：9

起止页码：20

中文期刊名：高分子材料科学与工程

外文期刊名：Polymer Materials Science & Engineering

收录：CSTPCD;;EI(收录号：20114414474692);Scopus;北大核心:【北大核心2008】；CSCD:【CSCD2011_2012】；

基金：国家自然科学基金资助项目(50933002);上海市重点学科建设项目资助(B502)

语种：中文

中文关键词：阴离子本体开环聚合;乙酸乙酯;聚三氟丙基甲基硅氧烷;反应挤出

外文关键词：anionic bulk ring-opening polymerization; ethyl acetate; poly[methyl（3; 3; 3-trifluoropropyl）] siloxane; reactive extrusion

摘要：以同向紧啮合双螺杆挤出机为反应器,硅醇钠/乙酸乙酯(EA)为引发体系,通过三氟丙基甲基环三硅氧烷(F3)阴离子本体开环聚合,制备了聚三氟丙基甲基硅氧烷(PMTFPS)。采用红外光谱(FT-IR),核磁共振(1H-NMR)和凝胶渗透色谱(GPC)确认了聚合物的结构与分子量,用电离飞行时间质谱分析了副产物的组成。研究表明,提高反应温度和EA用量可使反应平衡点提前到达。而螺杆转速对反应的主要影响在于改变聚合反应时间。因此,控制适当反应条件,使反应在平衡点到来时间之前终止,可得到高分子量以及高收率的PMTFPS。所得产物的数均分子量为2.41×105,分子量分散指数为1.12,产率为90.5%。
Poly[methyl（3,3,3-trifluoropropyl）] siloxane（PMTFPS） was polymerized by the anionic bulk ring-opening reaction of 1,3,5-tris（trifluoropropylmethyl） cyclotrisiloxane（F3） in a closely intermeshing twin-screw extruder using sodium silanolate/ethyl acetate（EA） as initiator system.The structure and number average molecular weight（M-n）of PMTFPS were confirmed by the analysis of FT-IR,1H-NMR and GPC.The constitution of side-products was analyzed by matrix-assisted laser desorption ionization time-of-flight mass spectrometry.Finding that the increase of the reaction temperature and the dosage of EA can shorten the time for the reaction balance point to come.On the other hand,the rotation speed of screws mainly affects the polymerization retention time.Thus,to obtain PMTFPS with high M-n and yield,the polymerization is terminated before the occurrence of reaction balance point by adjusting suitable reaction conditions.In this work,PMTFPS with 2.41×105 of M-n,1.12 of distribution index and 90.5% of yield was achieved.