文献类型：期刊文献

英文题名：Experimental Data and Modeling of Viscosity in the Quinary System NaCl plus KCl + CaCl2 + MgCl2 + H2O

作者：Wang, Sheng[1];Luo, Mengjie[1];Sun, Yuzhu[1];Wang, Congying[1];Song, Xingfu[1]

机构：[1]East China Univ Sci & Technol, Natl Engn Res Ctr Integrated Utilizat Salt Lake Re, Joint Int Lab Potassium & Lithium Strateg Resource, Shanghai 200237, Peoples R China

年份：2024

卷号：53

期号：12

起止页码：1656

外文期刊名：JOURNAL OF SOLUTION CHEMISTRY

收录：;WOS:【SCI-EXPANDED(收录号:WOS:001273434600001)】；

基金：The work was supported by the Special Project of Qinghai Province on Enterprise Research Transformation and Industrialization (2022-GX-C14) and Kunlun Talent Program of Qinghai Province for High-end Innovative Talents.

语种：英文

外文关键词：Viscosity prediction; Quinary system; Extended Jones-Dole model; Hu model

摘要：The viscosities of the quinary system NaCl + KCl + CaCl2 + MgCl2 + H2O and its binary subsystems are measured in the temperature range of 288.15 K-308.15 K. The viscosities of binary solutions of MgCl2, NaCl, and CaCl2 increase with the increase in concentration. In contrast, for the binary solution of KCl, the viscosity decreases with increasing concentration at low temperature and low concentration. The extended Jones-Dole model that incorporates higher-order term parameters is used to fit the viscosity of binary solutions, with a maximum Average Relative Deviation (ARD) of 1.42%. By comparing the values of the Pearson correlation coefficients, it is found that MgCl2 has the most significant impact on the viscosity of the quinary system MgCl2 + KCl + NaCl + CaCl2 + H2O, while the impact of KCl is the least. The modified extended Jones-Dole model, with the introduction of parameter G(i), can accurately predict the quinary system, resulting in a maximum AAD value of 0.63%. Moreover, the Hu model is also applied to predict the viscosity of the quinary system, achieving a maximum ARD value being 1.54%. Compared to the Hu model, the modified extended Jones-Dole model performs better. The viscosity calculation models for the quinary system MgCl2 + KCl + NaCl + CaCl2 + H2O in this study contribute key parameters for the design and optimization of the potassium chloride production process.