文献类型：期刊文献

中文题名：横肋管中的流动阻力

英文题名：Flow Resistance in Repeated-Rib Tubes

作者：戴干策[1];范自晖[2];王归仁[2]

机构：[1]华东化工学院联合化学反应工程研究所;[2]华东化工学院化学工程系

年份：1989

卷号：15

期号：3

起止页码：299

中文期刊名：华东化工学院学报

收录：国家哲学社会科学学术期刊数据库;Scopus;CSCD:【CSCD2011_2012】；

基金：国家自然科学基金会

语种：中文

中文关键词：横肋管;流动阻力;传热

外文关键词：flow resistance; transverse ribbed tube; smooth regime; transition regime; completely rough regime; rough Reynolds number: sand roughness

摘要：以三种不同直径的铜管和有机玻璃管构成实验管路系统,研究了横肋管中空气流动阻力特性。在峰高为(0.01～0.11)d,间距为(7～40)d,Re=400～100000范围内,试验提供了从层流到湍流范围内完整的阻力系数曲线。从阻力形成机理,分析了横肋的峰高k,间距s,厚度w等因素对阻力系数的影响。并得到了简明的数据关联式f_r/f_s=1+128(k/d)^(1.36)(s/k)^(-0.41)Re^(0.25) 式中f_r为横肋管阻力系数;f_s为光滑管阻力系数;d为管径。
In this paper flow resistance in three different sizes of traverse-ribbed tubes was measured with air as the working fluid within the range of the following parameters: k/d=0.01～0.11, s/k=7～40, Re=400～100000. Experimental data are shown in terms of curves of Fanning factor versus Reynolds number and correlated by an empirical formulaf_r/f_s=1+128(k/d)^(1.36)(s/k)^(-0.41)Re^(0.25)The influences of roughness geometry such as rib height, spacing and thickness on friction factor are discussed and the total resistance increament in repeated-rib tube is also explained on the basis of the mechanism of resistance.