详细信息

Impact fracture toughness of short glass fiber-reinforced polyamide 6,6 hybrid composites containing elastomer particles using essential work of fracture concept  ( SCI-EXPANDED收录 EI收录)  

文献类型:期刊文献

英文题名:Impact fracture toughness of short glass fiber-reinforced polyamide 6,6 hybrid composites containing elastomer particles using essential work of fracture concept

作者:Tjong, S.C.[1]; Xu, S.A.[1,2]; Mai, Y.W.[3,4]

机构:[1]City Univ Hong Kong, Dept Phys & Mat Sci, Kowloon, Hong Kong, Peoples R China;[2]E China Univ Sci & Technol, Inst Polymer Sci & Engn, Shanghai 200237, Peoples R China;[3]City Univ Hong Kong, Dept Mech & Mechatron Engn, Kowloon, Hong Kong, Peoples R China;[4]Univ Sydney, Sch Aerosp Mech & Mechatron Engn, CAMT, Sydney, NSW 2006, Australia

年份:2003

卷号:347

期号:1-2

起止页码:338

外文期刊名:MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

收录:;EI(收录号:2003097382816);WOS:【SCI-EXPANDED(收录号:WOS:000181116400040)】;

语种:英文

外文关键词:impact; fracture resistance; essential work; hybrid composites; glass fiber; elastomer

摘要:Polyamide 6,6 (PA6,6) hybrid composites toughened with maleated styrene-ethylene butylene-styrene (SEBS-g-MA) and reinforced with 5, 10, 15, 20 and 30% short glass fiber (SGF) were prepared via melt blending followed by injection molding. The matrix blend of composites consisted of 80 wt.% PA6,6 and 20 wt.% SEBS-g-MA. The impact fracture resistance of injection-molded PA6,6/SEBS-g-MA 80/20 blend and its hybrid composites was investigated. Drop weight Charpy impact test showed that the hybrids exhibit much higher notched impact strength than the PA6,6 polymer under various test velocities of 1-5 in s(-1). Tough PA6,6/SEBS-g-MA 80/20 blend was not broken under the test velocities employed. The Charpy test is not a good technique to characterize the impact fracture behavior of tough polymer blend. The impact fracture resistance of tough PA6,6/SEBS-g-MA 80/20 blend can be characterized successfully using the essential work of fracture (EWF) concept under a speed of 3 in s(-1). Moreover, impact EWF measurements indicate the specific essential fracture work of hybrids to decrease with increasing SGF content. The specific non-essential plastic work was absent in hybrids owing to glass fibers restricting shear yielding of the matrix of composites. (C) 2002 Elsevier Science B.V. All rights reserved.

参考文献:

正在载入数据...

版权所有©华东理工大学 重庆维普资讯有限公司 渝B2-20050021-7 
渝公网安备 50019002500408号 违法和不良信息举报中心