文献类型：期刊文献

中文题名：耐高温端乙炔基聚醚酰亚胺改性含硅芳炔树脂

英文题名：Silicon-Containing Arylacetylene Resin Modified by High Temperature Acetylene-Terminated Polyetherimide

作者：周晓辉[1];黄发荣[1];唐均坤[1];袁荞龙[1]

机构：[1]华东理工大学特种功能高分子材料及相关技术教育部重点实验室,上海200237

年份：2017

卷号：30

期号：3

起止页码：296

中文期刊名：功能高分子学报

外文期刊名：Journal of Functional Polymers

收录：北大核心:【北大核心2014】；CSCD:【CSCD2017_2018】；

基金：中央高校基本科研业务费专项资金(222201717001)

语种：中文

中文关键词：含硅芳炔树脂;端乙炔基聚醚酰亚胺;树脂改性;高性能树脂;先进复合材料

外文关键词：silicon-containing arylacetylene resin; acetylene-terminated polyetherimide; resin modification; high performance resin; advanced composite;

摘要：采用预共聚法,以含硅芳炔树脂(PSA)和端乙炔基聚醚酰亚胺(PEI)为原料,制备了端乙炔基聚醚酰亚胺改性的含硅芳炔(PEI-PSA)树脂及其与T300碳纤维平纹布的复合材料T300/PEI-PSA。通过动态热机械分析(DMA)和X射线能谱仪(EDS)研究了溶剂、溶液浓度、反应温度对预共聚反应的影响,确定了预共聚反应的最佳条件,得到了均匀分散的PEI-PSA树脂。通过红外光谱(FT-IR)、核磁共振氢谱(1 H-NMR)、差示扫描量热(DSC)、热失重(TG)、DMA和EDS等表征了PEI、PEI-PSA树脂及T300/PEI-PSA复合材料的结构和性能。结果表明,当PEI质量分数为20%时,PEI-PSA树脂浇铸体的弯曲强度达44.5 MPa,较PSA树脂浇铸体提高了90.2%;T300/PEI-PSA复合材料的弯曲强度达602.7 MPa,较T300/PSA复合材料的弯曲强度提高了124%。
Using silicon-containing arylacetylene resin （PSA） and acetylene-terminated polytherimide（PEI）as raw materials,the modified silicon containing arylacetylene resin （PEI-PSA） with an acetyleneterminated polyetherimide and the T300/PEI-PSA carbon fiber reinforced composite were prepared by pre-copolymerization.Effects of solvent,reaction temperature and solution concentration on the pre-copolymerization and the dispersion of PEI in PSA were investigated by Dynamic Mechanical Analysis （DMA） and Energy Dispersive X-ray Spectroscopy （EDS）.The optimum conditions of the pre-copolymerization were determined and the uniform PEI-PSA resin was obtained.The structures and properties of PEI,PEI-PSA resin and T300/PEI-PSA composites were characterized by Fourier Transform Infrared （FT-IR） spectra,Hydrogen Nuclear Magnetic Resonance （~1H-NMR）,Differential Scanning Calorimetry （DSC）,Thermogravimetric （TG） analysis,DMA and EDS.Results showed that when the mass fraction of PEI in PEI-PSA resin was 20%,the flexural strength of the produced PEI-PSA resin casting reached 44.5MPa and increased by 90.2%,as compared with the PSA resin casting.The flexural strength of the T300/PEI-PSA composite reached 602.7 MPa and increased by 124%,as compared with the T300/PSA composite.