文献类型：期刊文献

中文题名：树脂包覆率对微胶囊包覆聚磷酸铵阻燃聚乳酸性能的影响

英文题名：Effect of Resin Encapsulation Ratio on Properties of Microencapsulated Ammonium Polyphosphate and Polylactide Flame Retardant Blends

作者：赵雅文[1];陆冲[1];程树军[1]

机构：[1]华东理工大学材料科学与工程学院,上海200237

年份：2017

卷号：43

期号：2

起止页码：193

中文期刊名：华东理工大学学报（自然科学版）

外文期刊名：Journal of East China University of Science and Technology

收录：CSTPCD;;Scopus;北大核心:【北大核心2014】；CSCD:【CSCD_E2017_2018】；

语种：中文

中文关键词：聚乳酸;原位聚合;密胺树脂;微胶囊;聚磷酸铵;阻燃

外文关键词：p o ly la c t id e; in-situ p o lym e r iz a t io n; me lam in e - fo rm a ld eh y d e r e s in; m ic ro e n c a p su la t io n; ammonium polyphosphate; flame re ta rd a n t

摘要：通过原位聚合法,以密胺树脂(MF)为壁材,制备了微胶囊包覆聚磷酸铵(MCAPP),然后密炼将MCAPP与聚乳酸(PLA)熔融共混,得到微胶囊包覆聚磷酸铵阻燃聚乳酸,并研究了不同树脂包覆率的MCAPP对共混物形貌结构、加工性能、热性能、力学性能以及阻燃性能的影响。结果表明,在原位聚合过程中,当MF质量分数为17.2%时,MCAPP树脂包覆率可达13.2%,共混物中PLA结晶度提高,降解程度最低,同时阻燃效果最佳,极限氧指数可达39.4%,并且垂直燃烧等级达到UL94V0级。
Mic ro en c ap su la ted ammo n ium p o ly p h o sp h a te （ MCA P P ） was sy n th e s iz ed by in-situ polymerizat ion wi th melamine-formaldehyde （MF） resin as wall mater ial . The MCAPP and polylact ide （PLA） flame retardant blends were prepared via internal mixing. The effect of dif ferent MCAPP encapsulation rat ios on the morphology,processabi l i ty, thermal propert ies,mechanical proper t ies and flame retardancy of the blends were s tudied. When the mass f ract ion of MF res in addit ion is 17. 2% in the polymer izat ion, the blend’s MCAPP encapsulation rat io reaches 13. 2%. T h is b lend has th e b e s t flame retardant effect , the lowest degree of degradat ion and an increased degree of crystal l ini ty of PLA. LOI value of this blend is 39. 4% and the UL-94 rat ing is raised to V0 level.