文献类型：期刊文献

中文题名：工业反应过程的开发方法Ⅱ．负压法乙苯脱氢绝热反应器的开发

英文题名：Methodology for the Development of Industrial Reaction Processes Ⅱ. The Development of Adiabatic Reactor for the Dehydrogenation of Ethylbenzene to Styrene under Reduced Pressure

作者：朱中南[1];吴民权[1];张浩[1];黄发瑞[1];朱晓蒙[1];杜贫[1]

机构：[1]华东理工大学联合化学反应工程研究所

年份：1994

卷号：23

期号：3

起止页码：173

中文期刊名：石油化工

外文期刊名：Petrochemical Technology

收录：CSTPCD;;Scopus;北大核心:【北大核心1992】；CSCD:【CSCD2011_2012】；

基金：国家自然科学基金;中国石化总公司资助

语种：中文

中文关键词：乙苯;脱氢;绝热反应器;负压法

外文关键词：dehydrogenation of ethylbenzene to styrene,adiabatic reactor,radial velocitiesdistribution, conic stream guide

摘要：针对乙苯脱氢绝热反应器工程特点建立了有关转化率和选择性的数学模型。为进一步减少径向反应器阻力降，提出变截面Ｚ型中心分流流型设计计算式。根据本研究结果提出６万吨苯乙烯／年负压法绝热反应器的设计基础。
The research aims at providing data for designing a 60000 tpy styrene production unit. First, the nature of dehydrogenation of ethylbenzene to styrene was studied in an experilmen-tal adiabatic reactor. A linear algebraic model for the conversion of ethylbenzene and theselectivy of styrene was obtained on the basis of engineering characteristics of adiabtic re-actor of dehydrogenation of ethylbenzene to styrene. The experimental data were also used inthe study of kinetics.The Carra model was confirmed as the best by model descrimination,and the model parameters were obtained through estimation, Second,in order to obtain a uni-form distribution of radial velocities in the radial flow reactor with low bed loss,a conicstream guide was installed in the central tube to change its cross sectional area along theaxis of the Z-type radial reactor,and a differential equation for defining the contour ofthe conic stream guide was established.