文献类型：期刊文献

中文题名：基于LabVIEW与PLC的开放式数控系统串口无线通讯的研究

英文题名：Study on The Wireless Communication of ONC System Based on LabVIEW and PLC

作者：李英[1];陈传凯[1];苏贞志[1]

机构：[1]华东理工大学机械与动力工程学院,上海200237

年份：2012

期号：7

起止页码：49

中文期刊名：组合机床与自动化加工技术

外文期刊名：Modular Machine Tool & Automatic Manufacturing Technique

收录：CSTPCD;;北大核心:【北大核心2011】；

语种：中文

中文关键词：LabVIEW;PLC;串口无线通讯;VISA技术;开放式数控系统

外文关键词：LabVIEW ; PLC ; wireless communication ; VISA ; ONC system

摘要：针对无线通讯的开放式数控系统,文章介绍了其结构组成。根据串口、无线以及PLC通讯协议,设计了通讯流程。使用LabVIEW开发了上位机软件。利用其VISA技术实现了LabVIEW与PLC串口无线通讯。同时开发了PLC无线通讯数控加工程序。最后,在立式铣床的开放式数控系统中,以直线加工为例,测试了系统无线通讯控制的可行性;实验表明,所开发的无线通讯系统灵活、便捷、人机交互界面友好,满足开放式数控系统的使用要求。
For the ONC system based on the wireless communication, the composition of the system has been described in this paper. According to the communication protocols of the serial port, wireless and PLC, the process of communication has been designed. The upper computer software is developed under LabVIEW. The serial port wireless communication between the LabVIEW and PLC has been realized by use of the VISA of LabVIEW. At the same time, NC programs of PLC based on wireless communication have been developed. At last, the feasibility of wireless communication system has been tested with the example of linear processing in the ONC system of the vertical milling, The result shows that the wireless communication system developed is not only flexible and convenient, but also has a friendly HMI and meet the requirement of the ONC system.