文献类型：期刊文献

中文题名：错流移动床的压降特性

英文题名：The Investigation of Pressure Drop in a Moving Bed

作者：陈允华[1];朱学栋[1];吴勇强[1];朱子彬[1]

机构：[1]华东理工大学化学工艺研究所,上海200237

年份：2006

卷号：6

期号：5

起止页码：697

中文期刊名：过程工程学报

外文期刊名：The Chinese Journal of Process Engineering

收录：CSTPCD;;Scopus;北大核心:【北大核心2004】；CSCD:【CSCD2011_2012】；

语种：中文

中文关键词：错流移动床;空腔;压降

外文关键词：cross-flow moving bed; cavity; pressure drop

摘要：5在矩形移动床内考察了颗粒下移速度、颗粒堆积状态及空腔生成和长大发展过程等因素对压降的影响.在错流气体速度为0.09～1.35m/s、颗粒下移速度为0.95～9.68cm/min的较大变化范围内进行了实验研究.结果表明,颗粒下移速度对压降几乎没有影响;当错流气速足够大时移动床内将出现“空腔”和“贴壁”等现象,空腔的发展过程造成压降随时间出现稳定、微波脉动和大幅波动3种变化;欧根公式适用于低错流气速时的移动床压降;高错流气速下空腔出现了“生成-长大-塌落-流化”的循环变化过程.在实验基础上建立了有空腔时的移动床压降模型,并对空腔尺寸进行了无因次关联,其床层压降的计算结果与实验值相符.
The pressure drop of gas flowing through the cross-flow moving-bed was investigated in a two-dimension rectangular apparatus. The effects of particles flow rate, superficial gas velocity, formation and development of cavity/raceway and voidage of particles on the pressure drop were investigated experimentally with the operation conditions of 0-1.35 m/s of superficial gas velocity and 0.95-9.68 cm/min of particle velocity. The experimental results show that the particle velocity has little influence on the pressure drop; the phenomena of cavity and pinning occur when the cross-flow velocity is high enough, The development of a cavity or a raceway can cause three types of pressure drop with time, which are stabilization, slight fluctuation and severe fluctuation. The pressure drop of moving-bed can be calculated by Ergun＇s equation at low velocity of cross-flow gas. Cavity appears in a process cycle of ＂formation-growing up-coUapsing-fluidization＂ at high gas velocity. On the basis of experimental results, a model for calculating the pressure drop when a cavity occurs and a dimensionless relationship of cavity size is conduced, which agree with the experimental data.