文献类型：期刊文献

中文题名：炭二氧化硅复合气凝胶的合成及结构分析

英文题名：Synthesis and Structure of Carbon/Silica Hybrid Aerogels

作者：陈亮[1];张睿[1];龙东辉[1];凌立成[1]

机构：[1]华东理工大学化学工程联合国家重点实验室,上海200237

年份：2009

卷号：24

期号：4

起止页码：690

中文期刊名：无机材料学报

外文期刊名：Journal of Inorganic Materials

收录：CSTPCD;;EI(收录号：20093212244359);Scopus;WOS:【SCI-EXPANDED(收录号:WOS:000268301500009)】；北大核心:【北大核心2008】；CSCD:【CSCD2011_2012】；

基金：国家自然科学基金(50872033;50730003;50672023)

语种：中文

中文关键词：气凝胶;复合;孔结构

外文关键词：aerogel; hybrid; pore microstructure

摘要：将二氧化硅溶胶和间苯二酚-甲醛溶液混合,经溶胶-凝胶反应得到复合湿凝胶.再经超临界干燥和炭化得到炭-二氧化硅复合气凝胶.分别用氢氟酸刻蚀和空气烧蚀复合气凝胶中的二氧化硅和炭,得到结构完整的炭气凝胶和二氧化硅气凝胶.复合湿凝胶经常压干燥、炭化和氢氟酸刻蚀能得到炭干凝胶.利用透射电镜和低温氮气吸附对上述凝胶的微结构进行了表征.结果表明:复合气凝胶中,炭和二氧化硅纳米网络各自连续并相互嵌套.由于二氧化硅纳米网络的支撑作用,复合凝胶在超临界干燥和高温炭化过程中体积收缩减小,网络塌陷降低.所得炭气凝胶具有高比表面(934m2/g)和高孔容(3.9cm3/g)的特点.
Hybrid hydrogels were synthesized by sol-gel polymerization of resorcinol and formaldehyde added by colloidal silica solutions. Carbon/silica hybrid aerogels were prepared from the hydrogels by supercritical drying and carbonization. Carbon aerogels and silica aerogels were obtained by removing silica with HF etching and carbon with air burning from the hybrid aerogels respectively. Carbon xerogels were prepared by ambient drying, carbonization and HF etching from the hydrogels. The microstructures of the four kinds of gels were characterized by TEM and N2 adsorption. It is found that the carbon and silica frameworks are continuous and interpenetrated each other. The silica framework can improve the strength of hybrid gels, which can decrease the volume shrinkages by preventing collapse of the hybrid framework during supercritical drying and carbonization, resulting in carbon aerogels with high specific surface area of 934m^2/g and large total pore volume of 3.9cm^3/g.