文献类型：期刊文献

中文题名：泡沫镍负载改性TiO_2降解甲醛

英文题名：Photocatalysis of formaldehyde with porous nickel mesh loaded with modified TiO_2

作者：马云飞[1];陈宗家[1]

机构：[1]华东理工大学化学与分子工程学院,上海200237

年份：2014

卷号：8

期号：5

起止页码：2040

中文期刊名：环境工程学报

外文期刊名：Chinese Journal of Environmental Engineering

收录：CSTPCD;;Scopus;北大核心:【北大核心2011】；CSCD:【CSCD2013_2014】；

基金：中央高校基本科研业务费专项资金项目(wk1214064)

语种：中文

中文关键词：TiO2;光催化;泡沫镍;甲醛

外文关键词：titanium dioxide;;photocatalysis;;porous nickel mesh;;formaldehyde

摘要：为了消除甲醛气体对人类的危害,对甲醛气体的光催化降解行为进行了研究。采用沉淀-胶溶法制得了具可见光活性的纳米TiO2溶胶,然后将其负载于经过预处理的泡沫镍板上,置于自置的光催化反应器中,考察了在可见光照射下对密闭空间里面一定浓度的甲醛气体的降解情况。采用乙酰丙酮分光光度法,在最佳的检测条件下检测气相中甲醛气体经不同光照时间后的浓度。研究发现,负载了氮掺杂改性的TiO2的泡沫镍板在可见光照射下能够有效降解气相中的甲醛,反应240 min后对甲醛气体的降解率为93%;而同样条件下反应器中只有处理过的泡沫镍板时,甲醛气体浓度基本保持不变。
The photocatalytic degradation of formaldehyde was studied in order to eliminate the effect of formaldehyde on people's health.The visible light response nitrogen doped TiO2 sol was synthesized by precipitation-peptization method and was loaded on the pre-treated porous nickel mesh by impregnation method.The porous nickel mesh loaded with modified TiO2 was set in the photocatalysis reactor.The concentration of formaldehyde after different hours of irradiation was tested by spectrophotometry with acetylacetone.It is found that formaldehyde can be degraded efficiently by N-TiO2 loaded porous nickel mesh.The degradation of formaldehyde is 93% after 240 minutes visible light irradiation.The concentration of formaldehyde keeps constant with only the porous nickel mesh.