详细信息
同步辐射小角X射线散射研究PAN原丝制备过程中孔结构的演变 ( EI收录)
Pore Structure Evolution in PAN Fibers During Preparation by Synchrotron Radiation Small Angle X-Ray Scattering
文献类型:期刊文献
中文题名:同步辐射小角X射线散射研究PAN原丝制备过程中孔结构的演变
英文题名:Pore Structure Evolution in PAN Fibers During Preparation by Synchrotron Radiation Small Angle X-Ray Scattering
作者:王琴[1];梁晓怿[1];吕春祥[2];张睿[1];乔文明[1];詹亮[1];刘鸿鹏[1];凌立成[1];陈中军[3];董宝中[3]
机构:[1]华东理工大学化学工程联合国家重点实验室,上海200237;[2]中国科学院山西煤炭化学研究所炭材料重点实验室,山西太原030001;[3]中国科学院北京高能物理研究所同步辐射实验室,北京100039
年份:2009
卷号:25
期号:1
起止页码:126
中文期刊名:高分子材料科学与工程
外文期刊名:Polymer Materials Science & Engineering
收录:CSTPCD;;EI(收录号:20091011946379);Scopus;北大核心:【北大核心2008】;CSCD:【CSCD2011_2012】;
基金:上海市“登山行动计划”(06DZ22003)
语种:中文
中文关键词:聚丙烯腈纤维;同步辐射小角X射线散射;孔隙结构
外文关键词:PAN fiber; synchrotron radiation small angle X-ray scattering; pore structure
摘要:采用同步辐射小角X射线散射研究了PAN原丝制备过程中纤维孔结构的演变。结果表明,在水洗工艺中,纤维孔隙较多、较大,孔径分布较宽,近似圆形;在热水牵伸工艺中,纤维孔隙仍较多、较大,孔径分布较宽,近似椭圆形,长轴约17 nm^21 nm,短轴约4 nm^11 nm;在干燥致密化工艺中,孔隙急剧减少、减小,孔径分布较窄,沿纤维轴向约7 nm^9nm,垂直纤维轴向约2 nm;经过蒸汽牵伸,孔隙又增多、增大,孔径分布变宽,孔隙沿纤维轴向被牵伸得很长,近似梭形;但是随后的松弛热定型又使孔隙减小,孔径分布变窄。
The pore structure changes of the PAN fibers were characterized by synchrotron radiation small angle X- ray scattering. It is found that the pores in fibers formed during washing are rich and large, having a quasi-spherical shape and a wide size distribution. The stretching of fibers in hot water elongates the pores, leading to an ellipsoidal shape with 17 nm--21 nm in long axis and 4 nm-- 11 nm in short axis. The drying of fibers leads to a decrease in size and amount of pores, 7 nm--9 nm along the axis and ≈2nm perpendicular to the axis, and a narrow pore size distribution. The steam stretching of fibers increases the amount of pores and elongates significantly the pores along the fiber axis. The heat treatment of fibers makes the pore size smaller and the pore size distribution narrower.
参考文献:
正在载入数据...
