文献类型：期刊文献

中文题名：金属与金属接触型螺栓法兰接头保温后的密封性能

英文题名：Sealing Performance of Metal to Metal Contact Bolted Flanged Joints under Insulation

作者：陈圆[1];徐严言[1];关凯书[1];章兰珠[1]

机构：[1]华东理工大学承压系统安全科学教育部重点实验室,上海200237

年份：2016

卷号：41

期号：3

起止页码：48

中文期刊名：润滑与密封

外文期刊名：Lubrication Engineering

收录：CSTPCD;;Scopus;北大核心:【北大核心2014】；CSCD:【CSCD_E2015_2016】；

基金：国家自然科学基金项目(51275171)

语种：中文

中文关键词：金属与金属接触;保温;法兰密封

外文关键词：metal to metal contact;;heat preservation;;flange sealing

摘要：为金属与金属接触型螺栓法兰接头保温后的密封性能,搭建DN600、CLASS300金属与金属接触型(MMC)螺栓法兰接头高温保温试验装置,采用热电偶测量各组件在500℃下的温度分布及预紧和高温稳态下的法兰偏转角;利用有限元软件ANSYS建立法兰接头三维有限元模型并进行分析,利用试验结果对模拟进行验证,并分析保温时的密封性能。结果表明:保温提高了接头各部件温度;温度越高,密封性能越差;保温加快了螺栓载荷衰减速率,但密封性能变化不大。
To study on the sealing performance of metal to metal contact bolted flanged joints under insulation, a DN600CLASS300 metal to metal contact ( MMC) bolted flanged joints test device in high temperature with insulation was established,and the temperature distribution and flange rotation at 500℃ was measured by thermocouples.A three?dimen?sional flange joint finite element model was developed by finite element software ANSYS to calculation the temperature dis?tribution and flange rotation of MMC bolted flanged joints,and the simulation results were validated by experiments. The sealing performance was also analyzed under insulation. Results showed that the temperature of each component was im?proved when insulated.The higher the temperature,the worse the sealing performance.The decay rate of bolt load is acceler?ated by insulation,but the insulation has less influence on sealing performance.