文献类型：期刊文献

中文题名：尼龙6的双螺杆反应挤出工艺

英文题名：Twin-screw reactive extrusion process for nylon-6

作者：李兴田[1];邵佳敏[2]

机构：[1]南化集团研究院,江苏南京210048;[2]华东理工大学材料科学研究所,上海200237

年份：2000

卷号：21

期号：5

起止页码：16

中文期刊名：化学工业与工程技术

外文期刊名：Journal of Chemical Industry & Engineering

收录：CSTPCD

语种：中文

中文关键词：尼龙6;己内酰胺;双螺杆反应挤出机;挤出工艺

外文关键词：Caprolactam; Reactive extrusion; Nylon 6;Twin screw reactive extruder

摘要：介绍了国内尼龙 6的双螺杆反应挤出工艺。通过己内酰胺阴离子型快速聚合 ,直接反应成型制取高性能尼龙 6 ,具有生产连续 ,周期短 ,产品性能好的优点。反应挤出生产的尼龙 6相对粘度可达 4 2～ 5 0 ,拉伸强度、弯曲强度、缺口冲击等性能均优于传统工艺生产的尼龙 6。对双螺杆反应挤出机的工艺要求及特点作了简介。
The twin screw reactive extrusion process for nylon 6 inland was introduced. By anion rapid polymerization of caprolactam,high performance nylon 6 was produced with direct reaction and forming. This process had advantages of continuous operation, short period, and good performance of products.Comparing with nylon-6 produced by traditional process, the product produced by reactive extrusion had superior performance such as stretch strength, bending strength and notch impact, and the relative viscosity can reach to 4.2～5.0. The technical properties of twin screw reactive extruder were introduced briefly.