成果/Result
- Enhanced effect and mechanism of SiO2 addition in super-hydrophilic property of TiO2 films被引量：131收藏
- 作者：Guan, Kaishu Lu, Baojun Yin, Yansheng
- 机构：E China Univ Sci & Technol;Shandong Univ;Laiyang Agr Coll
- 来源：SURFACE & COATINGS TECHNOLOGY 2003
- 关键词：super-hydrophilic property TiO2/SiO2 composite films sol-gel
- Effect of aging at 700°C on precipitation and toughness of AISI 321 and AISI 347 austenitic stainless steel welds被引量：106收藏
- 作者：Guan, Kaishu Xu, Xiaodong Xu, Hong Wang, Zhiwen
- 机构：E China Univ Sci & Technol;Sinopec Corp
- 来源：NUCLEAR ENGINEERING AND DESIGN 2005
- 关键词：Aging of materials - Fractography - Microstructure - Precipitation (chemical) - Terbium - Toughness - Welding
- Effect of rare earth addition on super-hydrophilic property of TiO2/SiO2 composite film被引量：54收藏
- 作者：Guan, KS Yin, YS
- 机构：E China Univ Sci & Technol;Ocean Univ China
- 来源：MATERIALS CHEMISTRY AND PHYSICS 2005
- 关键词：TiO2/SiO2 composite films rare earth oxide super-hydrophilic property
- Effect of stress and strain on corrosion resistance of duplex stainless steel被引量：51收藏
- 作者：Yang, Jingqiang Wang, Qiongqi Guan, Kaishu
- 机构：E China Univ Sci & Technol
- 来源：INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING 2013
- 关键词：Duplex stainless steel Polarization Pitting corrosion Effects of stress Effects of strain
- Assessment of toughness in long term service CrMo low alloy steel by fracture toughness and small punch test被引量：49收藏
- 作者：Guan, Kaishu Hua, Li Wang, Qiongqi Zou, Xiaohui Song, Ming
- 机构：E China Univ Sci & Technol
- 来源：NUCLEAR ENGINEERING AND DESIGN 2011
- Analysis of failed ethylene cracking tubes被引量：49收藏
- 作者：Guan, Kaishu Xu, Hong Wang, Zhiwen
- 机构：E China Univ Sci & Technol
- 来源：ENGINEERING FAILURE ANALYSIS 2005
- 关键词：bulging failure cracks overheating tube failures chemical-plan failures
- Evaluation of stress corrosion, cracking susceptibility of stainless steel 304L with surface nanocrystallization by small punch test被引量：40收藏
- 作者：Bai, Tao Chen, Peng Guan, Kaishu
- 机构：E China Univ Sci & Technol
- 来源：MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2013
- 关键词：Stainless steel 304L Surface nanocrystallization Surface mechanical attrition treatment Small punch test Intergranular stress corrosion cracking Transgranular stress corrosion cracking
- Investigation of the mechanical properties of steel using instrumented indentation test with simulated annealing particle swarm optimization被引量：32收藏
- 作者：Huang, L. Y. Guan, K. S. Xu, T. Zhang, J. M. Wang, Q. Q.
- 机构：East China Univ Sci & Technol;China Special Equipment Inspect & Res Inst
- 来源：THEORETICAL AND APPLIED FRACTURE MECHANICS 2019
- 关键词：Instrumented indentation test Optimization algorithm Mechanical properties
- Failure of 304 stainless bellows expansion joint被引量：27收藏
- 作者：Guan, Kaishu Zhang, Xinghua Gu, Xuedong Cai, Longzhan Xu, Hong Wang, Zhiwen
- 机构：E China Univ Sci & Technol;Wujing Chem Co Ltd;Shanghai Refinery Co
- 来源：ENGINEERING FAILURE ANALYSIS 2005
- 关键词：stress corrosion cracking stainless steel bellow expansion joint hydrogen damage cracks strain induced martensite
- Evaluation of fracture toughness by notched small punch tests with Weibull stress method被引量：27收藏
- 作者：Xu, Yifei Guan, Kaishu
- 机构：E China Univ Sci & Technol
- 来源：MATERIALS & DESIGN 2013
- 关键词：Small punch test Single edge notch bending test Fracture toughness Weibull stress
- Cracks and precipitate phases in 321 stainless steel weld of flue gas pipe被引量：26收藏
- 作者：Guan, K.S. Xu, X.D. Zhang, Y.Y. Wang, Z.W.
- 机构：E China Univ Sci & Technol;China Petrochem Corp
- 来源：ENGINEERING FAILURE ANALYSIS 2005
- 关键词：austenite stainless steels precipitates sigma-phase cracks welds
- Size effect criteria on the small punch test for AISI 316L austenitic stainless steel被引量：26收藏
- 作者：Song, Ming Guan, Kaishu Qin, Wen Szpunar, Jerzy A. Chen, Ji
- 机构：Univ Saskatchewan;E China Univ Sci & Technol
- 来源：MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2014
- 关键词：Size effects Small punch test Texture Grain size 316L austenitic stainless steel
- Use of database and small punch test to estimate true stress-plastic strain curve of steels被引量：25收藏
- 作者：Zhong, Jiru Xu, Tong Wang, Wulin Guan, Kaishu Song, Ming Huang, Song Zhang, Shanglin
- 机构：East China Univ Sci & Technol;China Special Equipment Inspect & Res Inst;China Univ Petr East China;Nucl Power Inst China
- 来源：INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING 2021
- 关键词：Small punch test Database method Plastic parameters True stress-plastic strain curve
- Evaluation of stress corrosion cracking susceptibility of nanocrystallized stainless steel 304L welded joint by small punch test被引量：23收藏
- 作者：Bai, Tao Guan, Kaishu
- 机构：E China Univ Sci & Technol
- 来源：MATERIALS & DESIGN 2013
- 关键词：Stainless steel 304L Weld seam Heat affected zone Surface mechanical attrition treatment Small punch test Stress corrosion cracking
- Application of a database in the evaluation of strengths of Cr-Mo steels by means of small punch test被引量：21收藏
- 作者：Zhong, Jiru Song, Ming Guan, Kaishu Dymacek, Petr
- 机构：East China Univ Sci & Technol;China Univ Petr East China;Acad Sci Czech Republ
- 来源：INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 2020
- 关键词：Small punch test Strength of materials Database method Finite element simulations
- A procedure for predicting strength properties using small punch test and finite element simulation被引量：20收藏
- 作者：Zhong, Jiru Xu, Tong Guan, Kaishu Szpunar, Jerzy
- 机构：East China Univ Sci & Technol;China Special Equipment Inspect & Res Inst;Univ Saskatchewan
- 来源：INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 2019
- 关键词：Small punch test Finite element simulation True stress-strain curve Strength properties
- Determination of elastoplastic properties of in-service pipeline steel based on backpropagation neural network and small punch test被引量：19收藏
- 作者：Song, Ming Li, Xuyang Cao, Yuguang Zhen, Ying Zhong, Jiru Guan, Kaishu
- 机构：China Univ Petr East China;East China Univ Sci & Technol
- 来源：INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING 2021
- 关键词：Small punch test Backpropagation neural network True stress-strain curve Finite element method Pipeline steel
- Evaluation of the ductile-brittle transition temperature of anisotropic materials by small punch test with un-notched and U-notched specimens被引量：18收藏
- 作者：Guan, Kaishu Wang, Duwei Dobrovska, Jana Matocha, Karel
- 机构：East China Univ Sci & Technol;VSB Tech Univ Ostrava
- 来源：THEORETICAL AND APPLIED FRACTURE MECHANICS 2019
- 关键词：Small punch test Low temperature Ductile-brittle transition temperature U-notch grooves specimens Anisotropy
- Mechanism of Texture Formation in Iron Boride Coatings on Low-Carbon Steel被引量：18收藏
- 作者：Zhong, Jiru Qin, Wen Wang, Xu Medvedovski, Eugene Szpunar, Jerzy A. Guan, Kaishu
- 机构：East China Univ Sci & Technol;Univ Saskatchewan;Endurance Technol Inc
- 来源：METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 2019
- 关键词：Coatings - Iron - Low carbon steel - Textures
- Cracking failure analysis on a high-frequency electric resistance welding pipe in buried fire water pipeline被引量：18收藏
- 作者：Xia, Zilong Huang, Yichang Zhong, Jiru Guan, Kaishu
- 机构：East China Univ Sci & Technol;Shanghai Inst Special Equipment Inspection & Tech
- 来源：ENGINEERING FAILURE ANALYSIS 2023
- 关键词：Buried fire water pipeline Cracks High -frequency electric resistance welding
- Failure analysis of hot corrosion of weldments in ethylene cracking tubes被引量：17收藏
- 作者：Guan, K.S. Xu, Fubiao Wang, Z.W. Xu, Hong
- 机构：E China Univ Sci & Technol;Shanghai Petrochem Co Ltd
- 来源：ENGINEERING FAILURE ANALYSIS 2005
- 关键词：hot corrosion pitting corrosion tube failures chemical-plant failures welded fabrications
- Study on Temper Embrittlement and Hydrogen Embrittlement of a Hydrogenation Reactor by Small Punch Test被引量：16收藏
- 作者：Guan, Kaishu Szpunar, Jerzy A. Matocha, Karel Wang, Duwei
- 机构：East China Univ Sci & Technol;Univ Saskatchewan;Tech Univ Ostrava
- 来源：MATERIALS 2017
- 关键词：3Cr1Mo1/4V steel small punch test energy transition temperature temper embrittlement hydrogen embrittlement
- Correlation Factor Study of Small Punch Creep Test and Its Life Prediction被引量：16收藏
- 作者：Wen, Cheng Xu, Tong Guan, Kaishu
- 机构：East China Univ Sci & Technol;China Special Equipment Inspect & Res Inst
- 来源：MATERIALS 2016
- 关键词：small punch creep test uniaxial creep test correlation factor life prediction
- Comparison of mechanical properties in conventional and small punch tests of fractured anisotropic A350 alloy forging flange被引量：16收藏
- 作者：Song, Ming Guan, Kaishu Qin, Wen Szpunar, Jerzy A.
- 机构：E China Univ Sci & Technol;Univ Saskatchewan
- 来源：NUCLEAR ENGINEERING AND DESIGN 2012
- 关键词：Anisotropy - Load testing - Tensile testing - Fracture mechanics - Forging
- Study of estimation of ductile-brittle transition temperature using U-notched small punch test specimens被引量：16收藏
- 作者：Wang, Wulin Zhong, Jiru Zhang, Xiaocheng Jiang, Tao Guan, Kaishu
- 机构：East China Univ Sci & Technol
- 来源：THEORETICAL AND APPLIED FRACTURE MECHANICS 2020
- 关键词：Small punch test DBTT U-notched specimen Constraints Lower shelf
- Estimation of tensile strengths of metals using spherical indentation test and database被引量：16收藏
- 作者：Chen, Guoyao Zhong, Jiru Zhang, Xiaocheng Guan, Kaishu Wang, Qiongqi Shi, Jin
- 机构：East China Univ Sci & Technol
- 来源：INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING 2021
- 关键词：Spherical indentation test Database method Strength evaluation Finite element analysis
- Failure analysis of a weld-decayed austenitic stainless steel被引量：15收藏
- 作者：Song, Ming Guan, Kaishu
- 机构：E China Univ Sci & Technol
- 来源：ENGINEERING FAILURE ANALYSIS 2011
- 关键词：Weld decay Heat affected zone Intergranular corrosion
- Analysis of failed electron beam welds in ethylene cracking tubes被引量：14收藏
- 作者：Guan, Kaishu Wang, Qiangqi
- 机构：E China Univ Sci & Technol
- 来源：ENGINEERING FAILURE ANALYSIS 2011
- 关键词：Electron beam weld Ethylene cracking tubes Cracking Niobium-depletion
- Quantitative study of creep cavity area of HP40 furnace tubes被引量：14收藏
- 作者：Guan, Kaishu Xu, Hong Wang, Zhiwen
- 机构：E China Univ Sci & Technol
- 来源：NUCLEAR ENGINEERING AND DESIGN 2005
- 关键词：Continuum mechanics - Crack initiation - Creep - Ethylene - Metallography - Optimization
- Evaluation of tensile properties of austenitic stainless steel 316L with linear hardening by modified indentation method被引量：12收藏
- 作者：Wu, S. B. Guan, K. S.
- 机构：E China Univ Sci & Technol
- 来源：MATERIALS SCIENCE AND TECHNOLOGY 2014
- 关键词：Austenitic stainless steel Linear hardening Instrumented indentation test Modified indentation algorithm
