- Additive manufacturing of ultrafine-grained austenitic stainless steel matrix composite via vanadium carbide reinforcement addition and selective laser melting: Formation mechanism and strengthening effect被引量：122收藏
- 作者：Li, Bo Qian, Bo Xu, Yi Liu, Zhiyuan Zhang, Jianrui Xuan, Fuzhen
- 机构：East China Univ Sci & Technol;East China Univ Sci & Technol;Univ Calif Berkeley
- 来源：MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2019
- 关键词：Selective laser melting (SLM) Metal matrix composites (MMCs) 316 L stainless steel Ultrafine microstructure Strengthening
- 质疑
- Selective Laser Melting (SLM) Additively Manufactured CoCrFeNiMn High-Entropy Alloy: Process Optimization, Microscale Mechanical Mechanism, and High-Cycle Fatigue Behavior被引量：16收藏
- 作者：Zhang, Jianrui Yan, Yabin Li, Bo
- 机构：East China Univ Sci & Technol;Shanghai Collaborat Innovat Ctr High End Equipment
- 来源：MATERIALS 2022
- 关键词：selective laser melting high-entropy alloys CoCrFeNiMn process optimization microscale mechanical properties fatigue nano-twins
- 质疑
- Machine learning-based fatigue life prediction of laser powder bed fusion additively manufactured Hastelloy X via nondestructively detected defects被引量：13收藏
- 作者：Wang, Haijie Zhang, Jianrui Li, Bo Xuan, Fuzhen
- 机构：East China Univ Sci & Technol
- 来源：INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY 2025
- 关键词：Fatigue life Micro-computerized tomography Defect Machine learning Laser powder bed fusion
- 质疑
- Selective laser melting of G-surface lattice: forming process and boiling heat transfer characteristics被引量：13收藏
- 作者：Zhang, Jianrui Li, Pei Qian, Bo Li, Bo Qiu, Zhijun Xuan, Fuzhen
- 机构： School of Mechanical and Power Engineering; School of Mechanical
- 来源：Journal of Nanoparticle Research 2020
- 关键词：Heat transfer - Surface morphology - Deionized water - Selective laser melting - Heat flux - Melting - Porosity
- 质疑
- Multi-material laser powder bed fusion additive manufacturing of dual-phase laminated heterostructure of Cantor high-entropy alloy and Martensitic steel for overcoming strength-ductility trade-off被引量：13收藏
- 作者：Huang, Guoqing Li, Bo Zhang, Jianrui Xuan, Fuzhen
- 机构：East China Univ Sci & Technol;East China Univ Sci & Technol;Shanghai Collaborat Innovat Ctr Biomfg
- 来源：ADDITIVE MANUFACTURING 2025
- 关键词：Multi-material laser powder bed fusion Laminate Heterogeneous structure Strength-plasticity synergy Dual-phase
- 质疑
- AP-GAN-DNN based creep fracture life prediction for 7050 aluminum alloy被引量：13收藏
- 作者：Yan, Jianjun Zhou, Junwei Zhang, Jianrui Zhao, Peng Zhang, Ziang Wang, Weize Xuan, Fuzhen
- 机构：East China Univ Sci & Technol
- 来源：ENGINEERING FRACTURE MECHANICS 2024
- 关键词：7050 aluminum alloy Creep fracture life prediction Affinity propagation clustering Generative adversarial network Deep learning
- 质疑
- Microchannel Liquid-Cooled Heat Exchanger Based on a Nonuniform Lattice: Study on Structure Calculation, Formation Process, and Boiling Heat Transfer Performance被引量：10收藏
- 作者：Qian, Bo Fan, Hongri Liu, Gang Zhang, Jianrui Li, Pei
- 机构：Shanghai Univ Engn Sci;East China Univ Sci & Technol
- 来源：MATERIALS 2021
- 关键词：nonuniform lattice selective laser melting (SLM) microchannel heat exchanger boiling heat transfer cell structure
- 质疑
- Thermal analysis and effects study of evaporator exit vapor quality in a separate heat pipe被引量：9收藏
- 作者：Zhang, Jianrui Song, Ge Qiu, Zhijun Li, Huijun
- 机构：East China Univ Sci & Technol;Univ Wollongong
- 来源：APPLIED THERMAL ENGINEERING 2020
- 关键词：Separate heat pipe Vapor quality Heat transfer rate
- 质疑
- Multi-source information fusion for enhanced in-process quality monitoring of laser powder bed fusion additive manufacturing被引量：8收藏
- 作者：Shen, Tao Li, Bo Zhang, Jianrui Xuan, Fuzhen
- 机构：East China Univ Sci & Technol;East China Univ Sci & Technol;Shanghai Collaborat Innovat Ctr High end Equipment
- 来源：ADDITIVE MANUFACTURING 2024
- 关键词：Laser powder bed fusion In-situ quality monitoring Multi-source information fusion Defect prediction Melt-pool Convolutional neural network
- 质疑
- 加工残余应力对Ti-6Al-4V试样高周疲劳性能的影响被引量：7收藏
- 作者：常帅 谈建平 张剑睿 涂善东
- 机构：华东理工大学机械与动力工程学院承压系统与安全教育部重点实验室
- 来源：《压力容器》 2021
- 关键词：Ti-6Al-4V合金 残余应力 高周疲劳 机械加工表面
- 摘要：为探究加工残余应力对高周疲劳性能的影响,以Ti-6Al-4V材料为研究对象,测试获得了相同表面粗糙度、不同表面残余应力试样的高周疲劳性能。结果表明,该材料的疲劳试样在加工时会产生较高的残余压应力,不同加工工艺下的试样表面...
- 下载全文在线阅读质疑
- The Influence of Laser Powder Bed Fusion (L-PBF) Process Parameters on 3D-Printed Quality and Stress-Strain Behavior of High-Entropy Alloy (HEA) Rod-Lattices被引量：7收藏
- 作者：Zhang, Jianrui Li, Bo
- 机构：East China Univ Sci & Technol
- 来源：METALS 2022
- 关键词：laser powder bed fusion micro-rod surface roughness lattice structures mechanical properties additive manufacturing
- 质疑
- SLM实时预熔/重熔的新型成型工艺研究被引量：6收藏
- 作者：刘志远 钱波 李培 张剑睿 池敏 李腾飞
- 机构：华东理工大学机械与动力工程学院
- 来源：《机械科学与技术》 2019
- 关键词：预熔 重熔 孔隙率 微观结构 硬度
- 摘要：SLM(Selective laser melting)工艺是增材制造领域发展较为迅猛的一种工艺,其在复杂金属结构零件的制造领域具有极大的优势。为了降低SLM工艺的孔隙率,获得更高的致密度,以及更好的机械性能(硬度),提...
- 下载全文在线阅读质疑
- Self-Supporting Microchannel Liquid-Cooled Plate for T/R Modules Based on Additive Manufacturing: Study on Its Pass Design, Formation Process and Boiling Heat Transfer Performance被引量：6收藏
- 作者：Qian, Bo Fan, Hongri Liu, Gang Zhang, Jianrui Li, Pei
- 机构：Shanghai Univ Engn Sci;East China Univ Sci & Technol
- 来源：METALS 2021
- 关键词：transmit receive (T R) module laser-based powder bed fusion (L-PBF) microchannel structure boiling heat transfer additive manufacturing
- 质疑
- Study on laser powder bed fusion of nickel-base alloy of G-surface structure: scanning strategy, properties and compression properties被引量：5收藏
- 作者：Qian, Bo Fan, Hongri Zhang, Jianrui Li, Tengfei Xi, Jiangtao Qiu, Zhijun
- 机构：Shanghai Univ Engn Sci;East China Univ Sci & Technol;Univ Wollongong
- 来源：SCIENTIFIC REPORTS 2021
- 质疑
- Design and 3-D Printing-Assisted Fabrication of Microwave Resonator-Based Passive Wireless Sensors for Simultaneous Measuring High Temperatures and Pressures被引量：5收藏
- 作者：Li, Bo Shen, Jiawei Han, Hongyu Zhang, Jianrui Gao, Yang Xuan, Fuzhen
- 机构：East China Univ Sci & Technol
- 来源：IEEE SENSORS JOURNAL 2024
- 关键词：3-D printing complementary split-ring resonator (CSRR) microwave sensor substrate-integrated waveguide (SIW) 3-D printing complementary split-ring resonator (CSRR) microwave sensor substrate-integrated waveguide (SIW)
- 质疑
- Physics-informed Kolmogorov-Arnold network for remaining creep life prediction in 7050 aluminum alloy被引量：4收藏
- 作者：Yan, Jianjun Zhou, Junwei Zhang, Jianrui Zhao, Peng Zhang, Ziang Wang, Weize Xuan, Fuzhen
- 机构：East China Univ Sci & Technol
- 来源：ENGINEERING FRACTURE MECHANICS 2025
- 关键词：Remaining creep life prediction Physics-informed Kolmogorov-Arnold network Physics informed neural network Hybrid physics-data driven approach 7050 aluminum alloy
- 质疑
- Periodic Lattice Porous Structure Produced by Selective Laser Melting: Process, Experiment and Numerical Simulation Analysis被引量：4收藏
- 作者：Zhang, Jianrui Chi, Min Qian, Bo Qiu, Zhijun
- 机构：East China Univ Sci & Technol;Univ Wollongong
- 来源：CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES 2020
- 关键词：Selective laser melting numerical simulation stress field lattice porous structure
- 质疑
- Integrated computational materials engineering (ICME) for predicting tensile properties of additively manufactured defect-free single-phase high-entropy alloy被引量：4收藏
- 作者：Shen, Tao Li, Bo Zhang, Jianrui Xuan, Fuzhen
- 机构：East China Univ Sci & Technol;East China Univ Sci & Technol;Shanghai Collaborat Innovat Ctr High end Equipment
- 来源：VIRTUAL AND PHYSICAL PROTOTYPING 2025
- 关键词：Laser powder bed fusion structure-property relationship cellular automata machine learning integrated computation
- 质疑
- RETRACTED: Selective laser melting of G-surface lattice: forming process and boiling heat transfer characteristics (Retracted Article)被引量：3收藏
- 作者：Zhang, Jianrui Li, Pei Qian, Bo Li, Bo Qiu, Zhijun Xuan, Fuzhen
- 机构：East China Univ Sci & Technol;Univ Wollongong
- 来源：JOURNAL OF NANOPARTICLE RESEARCH 2020
- 关键词：Selective laser melting G-surface Boiling heat transfer Grid forming Nanostructure Microstructure
- 质疑
- Fast calculation algorithm for region recognition and model interference ratio in the STL model based on voxel mapping decoupling被引量：3收藏
- 作者：Qian Bo Fan Hongri Zhang Jianrui
- 机构：Shanghai Univ Engn Sci;East China Univ Sci & Technol
- 来源：INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 2022
- 关键词：Voxel algorithm STL model Region recognition Interference ratio 3D Printing
- 质疑
- Heat Exchanging Grid Structures Based on Laser-Based Powder Bed Fusion: Formation Process and Boiling Heat Transfer Performance被引量：3收藏
- 作者：Qian, Bo Fan, Hongri Zhang, Jianrui Liu, Gang Li, Pei
- 机构：Shanghai Univ Engn Sci;East China Univ Sci & Technol
- 来源：ENERGIES 2022
- 关键词：laser-based powder bed fusion (L-PBF) boiling heat transfer grid structure pool boiling critical heat flux (CHF)
- 质疑
- Multi-material laser powder bed fusion additive manufacturing of a bimodal laminate heterostructure with Cu-base and Ni-base alloys被引量：3收藏
- 作者：Yan, Liming Li, Bo Zhang, Jianrui Xuan, Fuzhen
- 机构：East China Univ Sci & Technol;Shanghai Collaborat Innovat Ctr High End Equipment;East China Univ Sci & Technol
- 来源：CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY 2025
- 关键词：Additive manufacturing Multi-material laser powder bed fusion Heterogeneous structure Strength-ductility synergy
- 质疑
- Retraction Note: Selective laser melting of G-surface lattice: forming process and boiling heat transfer characteristics (Journal of Nanoparticle Research, (2020), 22, 7, (178), 10.1007/s11051-020-04914-7)被引量：1收藏
- 作者：Zhang, Jianrui Li, Pei Qian, Bo Li, Bo Qiu, Zhijun Xuan, Fuzhen
- 机构： School of Mechanical and Power Engineering; School of Mechanical
- 来源：Journal of Nanoparticle Research 2021
- 质疑
- A monitoring framework for predicting laser directed energy deposition property被引量：1收藏
- 作者：Shen, Tao Li, Bo Ren, Facai Fan, Enxiang Zhang, Jianrui
- 机构：East China Univ Sci & Technol;East China Univ Sci & Technol;Shanghai Inst Special Equipment Inspect & Tech Res;Shanghai Elect Grp Co Ltd
- 来源：INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 2025
- 关键词：Additive manufacturing Machine learning Process monitoring Laser directed energy deposition Multi-source information fusion Tensile performance prediction
- 质疑
- Convertible Thermal Meta-Structures via Hybrid Manufacturing of Stereolithography Apparatus 3D Printing and Surface Metallization for Thermal Flow Manipulation被引量：1收藏
- 作者：Li, Bo Zhang, Jianrui Deng, Tianxiang Ren, Facai
- 机构：East China Univ Sci & Technol;East China Univ Sci & Technol;Shanghai Collaborat Innovat Ctr High End Equipment;Shanghai Inst Special Equipment Inspection & Tech
- 来源：POLYMERS 2023
- 关键词：thermal metamaterial 3D printing thermal manipulation thermal cloak thermal concentration
- 质疑
- 基于损伤力学的7050-T7451铝合金蠕变本构模型被引量：0收藏
- 作者：李杰 赵鹏 张剑睿 胡越 轩福贞
- 机构：华东理工大学机械与动力工程学院
- 来源：《机械强度》 2025
- 关键词：金属蠕变 连续损伤模型 沉淀粗化 微孔洞损伤 位错演化
- 摘要：通过单轴拉伸蠕变试验,研究了7050-T7451铝合金在不同温度和应力下的蠕变行为。基于连续介质损伤力学,建立了描述铝合金高温蠕变行为的本构模型。该模型考虑了蠕变过程中的沉淀相粗化、位错增殖/湮灭和微孔洞形成等微观组织演...
- 下载全文在线阅读质疑
- 选择性激光熔化成形温度场模拟与分析被引量：0收藏
- 作者：池敏 钱波 魏青松 张剑睿
- 机构：华东理工大学机械与动力工程学院;华中科技大学材料科学与工程学院
- 来源：《制造技术与机床》 2018
- 关键词：选择性激光熔化 温度场 熔池 ABAQUS
- 摘要：在316L不锈钢的选择性激光熔化(SLM)三维成形过程模拟中,针对目前普遍采用单层热源加载进行模拟的局限性,采用ABAQUS软件建立了一个三维多层有限元模型来解决此问题。主要研究了在成形过程中,激光功率和扫描速率对粉床热...
- 下载全文在线阅读质疑
- Controllable fabrication of porous PDMS via embedded 3D printing被引量：0收藏
- 作者：Zhang, Youchao Shen, Jinhan Zhang, Jianrui Xu, Jinsha Li, Bo
- 机构：East China Univ Sci & Technol;East China Univ Sci & Technol;Shanghai Inst Special Equipment Supervis & Inspect
- 来源：SENSORS AND ACTUATORS A-PHYSICAL 2026
- 关键词：Porous PDMS Embedded 3D Printing Controllable Pore Structure Compressive Strain Sensor
- 质疑
