成果/Result
- The effect of tool geometry on regenerative instability in ultrasonic vibration cutting被引量：34收藏
- 作者：Xiao, M. Wang, Q.M. Sato, K. Karube, S. Soutome, T. Xu, H.
- 机构：E China Univ Sci & Technol;Utsunomiya Univ
- 来源：INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE 2006
- 关键词：tool geometry stability diagram cutting model regenerative chatter computer simulation ultrasonic vibration cutting hard cutting
- New chip flow angle prediction to investigate the effects of ratio of the cutting edge lengths on chip flow using sharp corner tools被引量：26收藏
- 作者：Wang, Qingming Lin, Hailong
- 机构： School of Mechanical and Power Engineering
- 来源：Advanced Materials Research 2011
- 关键词：Cutting tools
- Influence of residual stress on the elastic-plastic response to indentation被引量：15收藏
- 作者：Sun, Yuan Wang, Qing-Ming
- 机构： School of Mechanical Engineering; School of Mechanical Engineering
- 来源：Journal of Donghua University (English Edition) 2008
- 关键词：Elastoplasticity - Indentation - Residual stresses - Materials properties - Piles
- 下载全文在线阅读
- A study on total contact insole basing on deformed human-shoe interfaces被引量：12收藏
- 作者：Wang, Qi Wang, Qingming
- 机构： School of Mechanical Engineering; School of Mechanical Engineering
- 来源：Proceedings - 2012 International Conference on Biomedical Engineering and Biotechnology, iCBEB 2012 2012
- 压痕硬度测试的有限元分析被引量：11收藏
- 作者：孙渊 王庆明
- 机构：华东理工大学机械与动力工程学院
- 来源：《华东理工大学学报（自然科学版）》 2007
- 关键词：压入过程 有限元分析 硬度 压痕参数 应力分布
- 摘要：根据压痕硬度测试理论,建立了有限元模型。通过有限元手段分析了金属材料在不同载荷作用下的压入过程,了解在压痕硬度试验过程中压痕周围所产生的应力分布,计算了硬度HB值,与在硬度试验中所测的HB值吻合,证实了模型和材料特性描述...
- 下载全文在线阅读
- A comparison of characteristics of improved total contact insoles被引量：10收藏
- 作者：Wang, Qi Wang, Qingming
- 机构： School of Mechanical Engineering; School of Mechanical and Power Engineering
- 来源：Applied Mechanics and Materials 2012
- 关键词：Reverse engineering
- A real electronic system to control virtual machine in NC machining simulation被引量：9收藏
- 作者：Wang, Qi Wang, Qingming Zhang, Xiaofeng
- 机构： School of Mechanical Engineering; School of Mechanical and Power Engineering
- 来源：Applied Mechanics and Materials 2012
- 关键词：Machine tools - Program debugging - Network security - Product design
- Study on Wireless Monitoring of Strain in Moving Objects被引量：9收藏
- 作者：Guo, Tong Wang, Qingming
- 机构： School of Mechanical and Power Engineering
- 来源：IOP Conference Series: Earth and Environmental Science 2019
- 关键词：Signal processing - Strain gages
- Centrifugal-force micro motion platform using vibration motor被引量：8收藏
- 作者：Zhang, Keer Ju, Jiachen Wang, Qing-Ming
- 机构： School of Mechanical and Power Engineering
- 来源：2017 International Conference on Computer Systems, Electronics and Control, ICCSEC 2017 2017
- Research for parameter selection scheduling system oriented to two grades of users被引量：7收藏
- 作者：Wang, Shuai Wang, Qing-Ming
- 机构： School of Mechanical Engineering
- 来源：ICIMA 2010 - 2010 2nd International Conference on Industrial Mechatronics and Automation 2010
- 关键词：Machining centers - Computer architecture
- Characterization of Hydrogen Embrittlement in 2.25cr-1mo-0.25v Steel by Eddy Current Method被引量：6收藏
- 作者：Zhou, Haiting Xu, Chi Wang, Qingming Pan, Hongliang Chen, Jianjun
- 机构：East China Univ Sci & Technol
- 来源：RESEARCH IN NONDESTRUCTIVE EVALUATION 2018
- 关键词：Hydrogenembrittlement eddy current 2 25Cr-1Mo-0 25V steel nondestructive
- Design and analysis of a novel micro-robot driving platform被引量：6收藏
- 作者：Ju, Jiachen Wang, Qingming Zhang, Keer
- 机构：East China Univ Sci & Technol
- 来源：PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 2019
- 关键词：Dry friction centrifugal force motion analysis mechanism design micro robots
- 面向成本的单机多工件调度中加工参数的选择被引量：1收藏
- 作者：王帅 王庆明
- 机构：华东理工大学机械与动力工程学院
- 来源：《华东理工大学学报（自然科学版）》 2008
- 关键词：加工参数 多工件调度 成本运算模型 遗传算法
- 摘要：基于对成本构成的分析,建立了适用于多工件调度的成本运算模型,适当地处理了调度过程和加工参数选择之间的关系,然后对模型应用遗传算法,并通过Matlab编程将算法实现。计算结果可知:在选择加工参数的同时进行工件排序的调度相对...
- 下载全文在线阅读
